Restore the accurate temperature monitoring and climate control of your HVAC system with the Samsung Air Conditioner Thermistor Assembly DB95-05010D. This specialized sensor assembly consists of high-precision thermistors designed to measure the temperature of the evaporator coils and the ambient intake air. By providing constant thermal feedback to the main PCB, this assembly allows the system to adjust refrigerant flow and fan speeds to reach your desired temperature while preventing the coils from freezing. A failing thermistor assembly often results in the "ice up" of the indoor unit, frequent short-cycling, or the system displaying specific temperature-related error codes.

Manufactured with high-sensitivity thermal beads and moisture-resistant polymer coating, the DB95-05010D is engineered for rapid thermal response and long-term stability. Its dual-sensor configuration and dedicated wiring harness ensure that both the copper tubing temperature and room air temperature are monitored simultaneously for balanced system performance.

Installation / Replacement Instructions:

1. Safety First: Turn off the air conditioner and disconnect the power supply at the circuit breaker or unplug the unit.
2. Access the Evaporator: Open the front panel of the indoor unit and remove the air filters. Locate the control box on the side of the unit.
3. Identify the Sensors: Find the black or blue sensor bulb clipped to the copper return bend of the evaporator coil and the ambient sensor bulb usually held by a plastic clip in front of the coils.
4. Disconnect the Harness: Trace the wires back to the control board and unplug the white plastic connector. Note the routing of the wires to ensure they are replaced in the same path.
5. Swap the Assembly: Unclip both old sensors and remove the assembly. Position the new DB95-05010D sensors into their respective clips, ensuring the coil sensor has firm contact with the copper pipe for accurate readings.
6. Reconnect and Test: Plug the harness back into the PCB, replace the filters and front panel, and restore power. Verify that the unit correctly senses the temperature and maintains a steady cooling cycle.

Compatible with select Samsung split-system air conditioning units, this OEM-quality thermistor assembly ensures factory-standard accuracy and energy-efficient operation.

Key Features:
• AC Thermistor Sensor Assembly – Part number DB95-05010D
• Dual-Sensing Logic – Monitors both coil temperature and ambient air for balanced cooling
• Prevents Coil Freezing – Provides critical data to stop ice buildup on the evaporator
• Rapid Thermal Response – High-sensitivity elements for immediate system adjustment
• Compatible with Select Samsung Models – Direct electrical replacement for a precise fit
• OEM-Quality Part – Restores original factory environmental monitoring and performance standards