Maintain the structural integrity and quiet operation of your indoor unit with the Samsung Air Conditioner Fan Holder Assembly DB90-07867B. This specialized bracket and bearing housing is designed to secure the cross-flow fan (blower wheel) in its precise alignment within the chassis. By providing a stable, low-friction mounting point for the fan motor and the blower shaft, it ensures the fan rotates smoothly without wobbling or contacting the internal housing. A cracked or worn fan holder can lead to persistent rattling, vibration, and excessive wear on the fan motor bearings.

Constructed from high-impact composite materials, the DB90-07867B is engineered to withstand the constant vibrations and temperature variations of an active air conditioning system. It typically features integrated dampening pads or bushings to absorb mechanical noise, ensuring your unit continues to operate at its original whisper-quiet decibel levels.

Installation / Replacement Instructions

1. Safety First: Turn off the air conditioner and disconnect the power supply at the main circuit breaker.
2. Open the Chassis: Remove the front intake grill, air filters, and the main plastic fascia of the indoor unit. You may also need to unclip the horizontal louvers to gain full access to the fan assembly.
3. Access the Fan Shaft: Locate the left and right mounting points of the blower wheel. The DB90-07867B is typically located on the side opposite the fan motor, holding the support bearing in place.
4. Secure the Fan: Before removing the holder, ensure the blower wheel is supported so it does not drop and damage the evaporator coils.
5. Swap the Holder: Unscrew the mounting bolts or release the plastic clips securing the old holder to the frame. Remove the old assembly and position the new DB90-07867B, ensuring any rubber bushings or bearings are correctly seated.
6. Align and Fasten: Tighten the mounting screws to secure the holder. Spin the fan by hand to verify that it rotates freely and is centered within the housing.
7. Reassemble and Test: Replace the unit's outer housing and filters. Restore power and run the unit at various fan speeds to confirm that all vibrations and mechanical noises have been eliminated.

Compatible with select Samsung split-system indoor units, this OEM-quality holder assembly restores the stable mechanical foundation required for efficient and quiet airflow.

Key Features
- AC Fan Holder Assembly – Part number DB90-07867B
- Precision Alignment – Keeps the blower wheel centered to prevent vibration and mechanical wear
- Noise Reduction – Integrated design features to dampen motor and fan resonance
- Durable Composite Construction – Built to resist warping and structural fatigue
- Compatible with Select Samsung Models – Direct replacement for a factory-standard mechanical fit
- OEM-Quality Part – Restores original structural stability and whisper-quiet performance