Restore the proper condensation management and prevent indoor water damage with the Samsung Air Conditioner Drain Tray Assembly DB82-02436A. This critical component, also known as the drain pan, is situated directly beneath the evaporator coils to collect the moisture pulled from the air during the cooling process. It features a pitched floor design that naturally funnels water toward the drain outlet, where it is then moved to the external drainage hose. A cracked, warped, or severely clogged drain tray is the primary cause of water leaking down the wall behind the unit or dripping from the bottom of the casing.

The DB82-02436A is manufactured from high-density, impact-resistant plastic designed to withstand constant exposure to water and thermal fluctuations. It often includes integrated foam insulation on the underside to prevent the tray itself from sweating and causing secondary drips. This genuine OEM part ensures a precision fit within the unit chassis, maintaining the airtight seal and drainage efficiency originally designed for your system.

Installation / Replacement Instructions

1. Safety First: Turn off the air conditioner and disconnect the power supply at the main circuit breaker.
2. Remove the Outer Housing: Lift the intake grille and remove the main front panel assembly. You will also need to remove the horizontal louvers and the vertical blades to fully expose the tray area.
3. Access the Drain Pan: The tray is located at the base of the evaporator coil. In many models, the tray is secured by several screws along the front edge and plastic clips at the back.
4. Disconnect the Drain Hose: Locate the connection point where the flexible drain hose meets the tray outlet. Carefully slide the hose off the barbed joint. Be prepared for a small amount of residual water to spill out.
5. Swap the Assembly: Remove the mounting screws and gently pull the tray forward. Be careful not to snag the delicate aluminum fins of the evaporator coil. Slide the new DB82-02436A into place, ensuring it is seated fully back into the chassis.
6. Reconnect and Secure: Push the drain hose firmly onto the new tray outlet. Reinstall the mounting screws and ensuring the tray is level or slightly pitched toward the drain side.
7. Leak Test: Before reassembling the housing, slowly pour a small amount of water into the tray and verify that it flows smoothly out of the drain hose without any leaks at the connection.
8. Reassemble: Reinstall the louvers and the main front panel. Restore power and check the units operation.

Compatible with select Samsung split-system indoor units, this OEM-quality drain tray assembly restores the reliable moisture management and structural integrity of your air handler.

Key Features
AC Drain Tray Assembly - Part number DB82-02436A
Pitched Design - Ensures efficient water flow and prevents stagnant water buildup
High-Density Construction - Resistant to thermal stress, cracking, and mold growth
Integrated Insulation - Prevents external condensation on the tray surface
Compatible with Select Samsung Models - Direct replacement for a factory-standard mechanical fit
OEM-Quality Part - Restores original drainage performance and prevents indoor water leaks