Maintain the precision temperature monitoring and automated climate control of your outdoor unit with the Samsung Air Conditioner Temperature Sensor DB32-00247A. This specialized thermistor is designed to monitor critical thermal points, such as the ambient outdoor air temperature or the compressor discharge pipe, depending on your system configuration. By transmitting constant thermal data to the inverter control board, it allows the system to optimize refrigerant flow and fan speeds to match environmental conditions. A faulty sensor can lead to inefficient cooling, ice buildup on the coils, or the system failing to enter the proper heating or cooling cycle.

The DB32-00247A is built with high-sensitivity Negative Temperature Coefficient (NTC) resistors that are sealed in a moisture-resistant casing to withstand outdoor exposure. Its durable wiring and precision-molded connector ensure a stable electrical signal, preventing the false error codes that often occur with degraded sensors.

Installation / Replacement Instructions

1. Safety First: Turn off the air conditioner and disconnect the power supply at the outdoor disconnect box or the main circuit breaker.
2. Access the Sensor: Remove the side or top panel of the outdoor condenser unit to locate the sensor. It is typically clipped onto the condenser fins or attached to the refrigerant piping.
3. Trace and Disconnect: Follow the sensor wire back to the main outdoor PCB. Carefully unplug the connector from the board, noting the specific port.
4. Remove the Old Sensor: Unclip the sensor head from its mounting position. If it is secured with a zip tie, carefully cut it without damaging the surrounding copper pipes.
5. Install the New Sensor: Position the new DB32-00247A in the exact same location as the old one. Ensure the sensor head has firm contact with the surface it is intended to measure for accurate readings.
6. Plug and Route: Route the wiring harness along the original path and plug the connector into the PCB until it clicks. Use zip ties to secure the wire away from the fan blades or hot discharge pipes.
7. Reassemble and Test: Replace the unit panels and restore power. Monitor the unit for a few minutes to ensure it starts correctly and that any previous temperature-related error codes have cleared.

Compatible with select Samsung outdoor condenser units, this OEM-quality temperature sensor provides the reliable thermal feedback necessary for high-performance climate control.

Key Features
- AC Outdoor Temperature Sensor – Part number DB32-00247A
- Accurate Thermal Monitoring – Enables the system to adjust operation based on outdoor conditions
- Moisture-Resistant Design – Built to withstand rain, humidity, and temperature fluctuations
- Plug-and-Play Connector – Includes the correct harness for a direct electrical fit
- Compatible with Select Samsung Models – Precision-matched for factory-standard resistance curves
- OEM-Quality Part – Restores original diagnostic accuracy and prevents system short-cycling